Tips on How to Extend the Life of Your Diamond Blade
Blog | December 9th, 2019Diamond blade, whatever the type you have, can be pretty sturdy and durable because of its natural composition. With this type of blade, pieces of diamonds are infused with the blade that can cut over a wide range of materials precisely and sharply. However, you must still take care of your diamond blade since it is still vulnerable to damages due to numerous reasons. The following are some tips on how to extend the life of your diamond blade.
Always Use the Right Blade
Diamond blades have numerous variations like diamond segmented, continuous rim, and turbo blades. Although all of them are diamond blades, the materials that they can cut are different from one another. Even the cutting technique is different. Some of them can be used for dry cutting, while some are for wet cutting. So, before you cut a material, see to it that you are using the appropriate blade and apply its recommended cutting technique.
Mount Your Blade Correctly
The right blade with right cutting technique is not enough for your diamond blade to avoid wearing down. Sometimes, people tend to skip and forget reading the instructions given by the manufacturer of the blade. These instructions are important since they indicate the proper direction when mounting the blade. If you don’t follow the instructions, the tiny bond that supports the cling to the diamond segments may be damaged.
Always Sharpen Your Blade
To make every cutting process count, you must maintain the sharpness of your diamond blade. Remember that the sharper your blade is, the easier it can cut the material involved. With the ease of cutting process, it helps prolong the life of your diamond blade and relieves any stress on your saw’s engine.
Avoid Overheating the Blade
The construction of diamond blades come from the use of heat. Thus, the heat itself can be a problem for the blade when used for too long. If you are dry cutting, there is a high chance that your diamond blade may run into the overheating problem. If you continuously use your blade without any rest, it will wear your blade down. One tip for you is to let your diamond blade cool first at regular intervals. Do this by letting the blade free-spin and cool down for a few minutes before cutting a material again.
Use a Functional Water Supply
To avoid overheating issues, some diamond blades entail the use of the wet cutting technique. However, the water supply must be sufficient for the entire cutting process. If the water supply is cut down in the middle of the process, the excessive friction can wear your blade down. The wearing down happens when the layer of diamonds are stripped away from the blade.
Don’t Overuse Your Blade
The sturdiness of your diamond blade is not a good reason for you to abuse its properties. Even if they can cut some materials at an appropriate procedure and cutting technique, they need to be used accordingly. Forcing your blade to the material prevents the diamonds on it to cut. As a result, this force causes damage to your blade and the material as well.
As long as you take care of your diamond blades, you can expect to use them for a longer time. If you want to know more about diamond blade products, you can contact us at Tooltec. We provide all types of diamond blades for your cutting needs.
Optimized by NetwizardSEO.com.au